▶ Want to learn industrial automation? Go here: http://realpars.com
▶ Want to train your team in industrial automation? Go here: http://realpars.com/business

▶ Check out the full blog post over at
https://realpars.com/vfdvssoftstarter

=============================

In this video, we will look at the internal workings of the devices, how to determine which device you might want, and look at some applications to better understand these differences.

Let’s first talk about the internal working of the two devices. A typical threephase soft starter uses six Thyristors or Silicon Controlled Rectifiers, oriented in an antiparallel configuration to start the electric motors smoothly.

A Thyristor is made up of 3 parts; a logic gate, a Cathode, and Anode. When an internal pulse is applied to the gate it allows current to flow from Anode to Cathode which then sends current out to our motor.

When the internal pulses do not apply to the gate, the SCRs are in the OFF state and therefore they restrict the current to the motor.

These internal pulses limit the applied voltage to the motor slowing down inrush current. The pulses are sent based on ramp time so the current will be slowly applied to the motor.

The motor, attached to the soft starter, will start up at a nice smooth current and top out at the preset maximum speed.

The motor will stay at that speed until we stop the motor where the soft starter will ramp down the motor in a very similar way as the ramp up.

VFD’s have three main components, a Rectifier, a Filter and an Inverter.

The Rectifier acts like Diodes, takes the incoming AC voltage and changes it to DC voltage.

Next, the Filter uses Capacitors to clean the DC voltage making it a smoother incoming power.

Finally, the “Inverter” uses transistors to convert the DC voltage and sends the motor a frequency in Hertz.

This frequency drives the motor to a specific RPM. We can set the ramp up and down times just like in a soft starter.

So how do we know which device is needed for our application? The decision on which device you choose comes down to how much control your application requires.

If your application requires a large inrush of current but does not require speed control, then a soft starter is the best option.
If speed control is required, then a VFD is a must.

Also, the price can be a determining factor in a lot of realworld applications. Since a soft starter has fewer control features, the price is lower than a VFD.

And finally, if the size of our device is a determining factor, soft starters are generally smaller than most of the VFDs.
Let’s look at some realworld applications to help us see the difference between a VFD and a Soft Starter.

The application we will look at is a cooling fan. In this scenario, a cooling fan will turn on when the plant air temperature hits a hightemperature setpoint.

Once the setpoint is reached the cooling fan will slow down to maintain the air temperature unless it drops below a lowtemperature setpoint, where it will shut off.

However, if the temperature continues to rise and pass the hightemperature setpoint, the fan will need to move faster.

Which device would work best in this situation? That’s right! A VFD would be better than a soft starter because the speed of the fan will need to vary.

If our scenario was only turning the fan on or off based on temperature and not changing speed, then a soft starter would be a better option.

In closing, a VFD and a Soft Starter can do similar functions when it comes to ramp up or down a motor.

The main difference between the two is a VFD that can vary the speed of a motor while a soft starter only controls the starting and stopping of that motor.

When faced with an application, price and size are in the favor of a soft starter.

A VFD is the better choice if speed control is required. The good news is that if an existing application has a soft starter in place and speed control is later determined to be a requirement, a VFD can easily replace a soft starter. The opposite is true as well, a soft starter can replace a VFD.

=============================

Missed our most recent videos? Watch them here:

https://realpars.com/dcs

https://realpars.com/softstarter

https://realpars.com/s7300versuss7...

=============================

To stay up to date with our last videos and more lessons, make sure to subscribe to this YouTube channel:

http://goo.gl/Y6DRiN

=============================

TWEET THIS VIDEO https://ctt.ac/Gy6TA

=============================

Like us on Facebook:   / therealpars  

Follow us on Twitter:   / realpars  

Follow us on LinkedIn:   / realpars  

Follow us on instagram:   / realparsdotcom  

#RealPars #VFD #SoftStarter