Volkswagen Passat B6 3C, B7 & CC (20062016) Dashboard removal or replacement in 46 steps.

Required tools:
flat blade screwdriver: https://amzn.to/3thkKWs
8 & 10 mm wrench or socket: https://amzn.to/45pWi7y
ratchet and extension ratchet: https://amzn.to/3wUiff8
M12 & M8 Triple Square Bit or Torx T55: https://amzn.to/48UK21W
trim tool: https://amzn.to/3Q1vIft
T20 & T25 Bit Torx: https://amzn.to/3Q3zAfI

HERE you can find VOLKSWAGEN Passat B6, B7, Golf Mk7, Tiguan, Touran Accessories at THE BEST PRICE: https://bit.ly/3EyBZdf

READ THE COMPLETE ARTICLE HERE: https://bit.ly/3Sfmpeb

00:00 Remove the steering wheel airbag
1. Insert the key in the ignition to unlock the steering wheel
2. Disconnect the battery terminals, starting first with the negative terminal
3. Adjust the steering wheel towards you and then lift it up
4. Release the airbag from the metal clip
5. Do the same with the other metal clip
6. Pull the airbag out of the steerinng wheel and diconnect the wires

05:40 Remove the steering wheel
7. Take the key out from the ignition to lock the steering wheel
8. Remove the bolt from the steering wheel using a 12 Point Spline Bit M12 S2
9. Remove the steering wheel

07:16 Remove the Clock Spring Airbag & Signal or Wiper's Arm
10. Remove the bolt from the underneath the steering wheel column
11. Separate those two plastic parts from the steering wheel column
12. Remove those two bolts
13. Disconnect the yellow harnes and the black harness from the clock spring airbag
14. Remove those two bolts using a 12 Point Spline Bit M8 S2

11:38 Remove the CD Radio Unit
15. Remove the Radio Unit frame using a trim tool and then disconnect the Hazard button cables
16. Remove the frame from the AC climate control unit panel using a trim tool and then remove the harness from the passanger's airbag warning light
17. Remove those 4 bolts using a T20 Torx and then take it out to remove the cables

14:17 Remove the AC (Climatronic) Control Panel
18. Remove those 4 bolts using a T20 Torx and then remove the cables

15:44 Remove the Interior Dash Trims
19. Remove the interior dash trims using a trim tool
20. Open the storage, push on the plastic tab from inside and then lower the storage
21. Remove the plastic cover from the left side of the dash

17:48 Remove the Headlight Switch
22. Remove the headlight switch pressing inside from the 0 position. While you keep pushing in, turn the headlight switch to Auto position
23. Remove those 2 bolts from the left side using a T20 Torx
24. Remove the bolt from inside the headlight switch location and then those two from above using a T20 Torx
25. Remove those 2 bolts and then disconnect the harnesses from the ignition and from the headlight adjustment switch

19:45 Remove the Instrument Cluster
26. Remove those 2 bolts using a T20 Torx and cables

20:54 Remove the Glove Box
27. Remove those 3 bolts from the lower side of the glove box and then those 4 bolts from the upper side using T20 & T25 Torx
28. Remove that hose from the glove box and cables

23:49 Remove the Armrest
29. Slide the seat back to remove the bolts from the left and right plastic parts using a T20 Torx
30. After you removed the plastic piece, remove the bolt using a T20 Torx
31. Remove those two bolts using a T20 Torx
32. Remove that plastic part and then remove the 2 bolts
33. Remove the part from the armrest pulling it straight and then up to take it out
34. Remove those 2 nuts using a 10 mm socket
35. Remove the gearbox lever gaiter

26:20 Remove the switches from the Gear Stick (Auto Hold Button, ESP Off button, Electronic Handbrake Button, Start Stop System Button, Parking Sensors Button)
36. Remove that plastic part then remove the 2 bolts
37. Remove those buttons from the left and right gear stick using a flat screwdriver and the cables
38. Remove that part from inside the ashtray and then remove those 2 bolts
39. Remove the ashtray and disconnect the cables

29:33 Remove the Dash Analog Clock
40. Pull the analog clock out and then disconnect the cables
41. Remove the A pillar trim using a trim tool and a T20 Torx
Remove that AIRBAG plastic cap from the A pillar trim
42. Remove the plastic piece from the lower part of the A pillars
43. Remove all the bolts that holds the dashboard in place using a T20 & T25 Torx and 8 mm socket
44. Remove the cables from the left and right air vents, from the interior temperature sensors and from the passenger's airbag

37:57 Remove the Light Sensor from the Dashboard
45. Use a trim tool to remove that light sensor and then disconnect the harness
46. Remove the dash.

This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!

In this post you will find affiliate links, meaning if you click through an affiliate link and make a purchase, I could make a commission. Thank you!