0:00 introduction
0:26 3.0mm/18 tooth gear, mounting
1:23 boring the center with a dental bur
2:28 reducing the thickness of the gear
2:59 grinding for a finer finish with a grinding attachment on my cross slide
3:44 1.6mm/9 tooth pinion, cutting off arbor and pivot
4:42 striking the center for drilling
5:11 drilling
5:52 cutting shoulder
6:39 grinding shoulder with a sapphire file
7:06 undercutting for rivet
7:35 riveting
8:10 grinding off other pivot and reducing thickness
9:00 finer finishing grinding
9:14 finish drilling through
9:38 remove old rivet from post (poor footage, sorry)
10:04 counter sink for new rivet
10:19 riveting
11:25 how it works under the barrel
11:53 reassembly
13:02 winding

This is a very abbreviated version of the process. It took me most of a day to complete this repair. If you have any questions or comments, feel free to leave them in the comments below. Thanks for watching.


watchmakers lathe, watchmaker's lathe, pocket watch wind indicator