This is a followup of my 4MB SIMM project. At that time, I created an altered version of SIMM PCBs that integrated a mod to operate EDO memory chips in FPM. A simple switch toggled between both modes and allowed me to get my 386 board to 32MB of system memory. Today, we are pushing the board to the limit! I will attempt to create 16MB SIMMs the maximum supported capacity of 30pin SIMMs. Let's see if I will be successful to get my 386 to 64 or even 128MB!

▬▬▬▬ PCBWay ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Sponsored by PCBWay: https://pcbway.com/g/lF253I
PCBWay provides full feature custom PCB prototyping services, 3D printing, and much more. Check them out using my referral link above and get a 5 USD welcome bonus when you sign up as a new customer!

16MB SIMM PCBs:
https://www.pcbway.com/project/sharep...

My contributions to the Community Project Space at PCBWay:
https://www.pcbway.com/project/member...

▬▬▬▬ UpLateGeek's Project ▬▬▬▬▬▬▬▬▬▬▬▬▬
https://github.com/UpLateGeek/LetsM...

▬▬▬▬ Affiliate Links ▬▬▬▬▬▬▬▬▬▬▬▬▬
Visit my website to find affiliate links to most of the tools and products I use
https://bitsundbolts.com/affiliate/'>https://bitsundbolts.com/affiliate/

Thank you for your support!

▬▬▬▬ Support Bits und Bolts ▬▬▬▬▬▬▬▬▬▬
Patreon:   / bitsundbolts  
Bitcoin: bc1q2dvf9flf78lam33qjj9w9xgvfxdgre7g9x3rmw

Twitter/X:   / bitsundbolts  
Facebook:   / bitsundbolts  

Website: https://bitsundbolts.com/

▬▬▬▬ Timestamps ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
00:00 Intro
01:36 Recap
04:43 Maximum capacity
05:31 Research
08:34 Preparation
09:45 Design PCBs
10:57 Unpacking
11:51 Building SIMMs
16:50 Final touches
17:19 Test
19:29 Where to get?